ERSENCER ENGINEERING
Representatives
RBL Steering Systems
Hydraulic Assisted Steering Gears Product Range
C200-V
- Ratio: 14,8 - 17,6 / 17,3 - 20,5
- Output torque: 3024 - 3590 Nm / 160 bar (µ=90%) max. admissible pressure (standart range) 160 bar
- Any position of Bevel Drive (optional) input shaft is possible
C300-V
- Ratio: 14,8 - 17,6 / 17,3 - 20,5
- Output torque: 3024 - 3590 Nm / 160 bar (µ=90%) max. admissible pressure (standart range) 160 bar
- Any position of Bevel Drive (optional) input shaft is possible
C500-V
- Ratio: 16,8 - 19,9 / 19,8 - 23,5
- Output torque: 5486 - 6523 Nm / 160 bar (µ=90%) max. admissible pressure (standart range) 160 bar
- Any position of Bevel Drive (optional) input shaft is possible
C700-V
- Ratio: 18,2 - 21,5 / 21,5 - 25,5
- Output torque: 6778 - 8059 Nm / 160 bar (µ=90%) max. admissible pressure (standart range) 160 bar
- Any position of Bevel Drive (optional) input shaft is possible
Hydraulic Assisted Steering Gears System Components
Bevel Box WG-100
- Transmissible Torque 100 Nm
- Angle of axles 90o
- Ratio 1:1
- Permanent Lubrication
- Maintenance free
T-Bevel Box WGT-100
- Transmissible Torque 100 Nm
- Angle of axles 90o
- Ratio 1:1
- Permanent Lubrication
- Maintenance free
Reservoir BFE-150
- ATF TYPE A
- Volume 1,5 ¦
- Filter for Parts > 10µm
- Electrical oil level control - normally open / normally closed or alternatively manual oil level control